...down the print head, put it back in your printer, put the cartridges in and run the print head cleaning function 2-3 times.If it still doesn't work, then you may have to replace the print
Question about Epson Computers & Internet
...head from the machine, wash it out under cold running water, dry it properly and replace in situ and it has been working well, even better than before...but are you BRAVE enough to do the same ...
...head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer ...
BLACK INK NOT PRINTING Hello, my printer epson stylus cx9300F 's not printing anything in black, already replaced cartridges did not work at all, cleaned the print heads.. nothing either. Does
...must say...I went into the "GUTS" of the beast and cleaned out the PADS (they are actually vacuum pads that the INK is sucked through during a HEAD cleaning) a very messy ...
...Head Cleaning utility. This will run the print head back and forth over a cleaning pad in the printer..After one or two of the cycles run the nozzle check again . This sounds like a long drawn out ...
Black won't work! I have had 2 new cartridges put in recently, both full of ink and it won't work when I try to print. The machine says all the ink levels are full and paper goes through as ...
Hi, I have put new ink my printer and it still wont print properly. It is missing words with lines all through it. I have cleaned the printed heads and done printing pages but still wont ...
My printer is printing dark black at first then the bottom of the page is light black. I have tried shaking the ink cartridge and I don't believe it is old enough to be out already. I just replaced it
26 questions posted
Usually answered in minutes!
22 Questions
16 Questions
14 Questions
13 Questions