Oregon Scientific Wireless IndoorOutdoor Thermometer with Atomic Clock Sync "weather channel set" Questions

...matches the "channel" setting on main unit. many weather stations will take up to 3 or 4 remote units and they must use different channels to relay the remote imfo to the main weather station

...weather station. How do I set the date and time? per the manual at http://www.lacrossetechnology.com/2316/manual.pdf on page 2 section 5 the unit sets its self to the world time radio signal from ...

Time is correct but date and day is not. How can I set the correct date? Press the SET button until the month if flashing. Then press the CH button until the correct month is showing. Press SET again ...

...set them ? which way do the batteries go back in--with positive and negative? You shoud use new batteries because you dont know how old the ones that are present are. You should also use lithium ...

...set the channel number, suggest you set channel 2 first if you have 2 remotes.  Once you stop setting the channel on the remote, 10 seconds later remote 2 should sync with the base.6. Remove and ...

...door of the remote unit there is a switch to set the radio channel it will send on. On the back of the base unit is a button marked CH to set the channel it will receive. Be sure these are the

...channel 1. Just set wireless sensor to channel 2 or 3, then select that same channel to display on the base unit.If you don't ever want to use the ice warning feature, then use channel 1 for a ...

...set on the same channel I have tried to follow instructions from instruction sheet but outdoor temperature will not stay on display The same as when you have two radio stations on the same channel or ...

How to set time zone on discovery channel tx2500 Press and hold the alarm button.

how do you set the time? Hi, Page 2 of the manual (linked below) details setting time on this device. http://www.lacrossetechnology.com/9782twc/manual.pdf