Question about Oregon Scientific Measuring Tools & Sensors
...batteries in main unit and pressing reset button. i think the trick is to ensure that the batteries go in the remote unit first, then the main unit after that. It has taken me days to work this
Question about Acu-Rite Measuring Tools & Sensors
unit is to install new batteries in the outside transmitter first, allow time for it to begin "talking" to the inside receiver, install batteries in the inside receiver and check for results. We would
Display station not showing outside temperature Check battery status indicator on main weather station of remote unit. If no indication, replace battery in remote unit. If battery is good then check ...
...unit or remote. Replace batteries in remote then in house unit and plug back into power. Set all settings and see if you get the reading. If not try step one again. Weak batteries will do the same ...
Question about Measuring Tools & Sensors
...unit inside and removing the batteries. Then add the batteries and let the base station look for the outdoor unit.) With the Davis instruments weather station with the solar powered unit, clean the ...
Question about Acu-Rite Measuring Tools & Sensors
...receiving the signal from the outdoor unit. If all of the batteries are in correctly except that battery, you will see the display, but will not get the data transmitted from the outside sending
Question about Oregon Scientific Measuring Tools & Sensors
...unit. If all of the batteries are in correctly but that one, you will see the display and the indoor temperature information, but the outdoor information will not be displayed. Also, make sure the ...
124 questions posted
Usually answered in minutes!
14 Questions
6 Questions