...temperature Check battery status indicator on main weather station of remote unit. If no indication, replace battery in remote unit. If battery is good then check "channel setting" of remote unit to ...
Question about Taylor Measuring Tools & Sensors
...temperature channel indicator) will start flashing. This indicates that the base station is ready to pick up the RF outdoor temperature signal from the remote sensor. It will continue to flash for 3 ...
Question about Measuring Tools & Sensors
...temperature channel indicator) will start flashing. This indicates that the base station is ready to pick up the RF outdoor temperature signal from the remote sensor. It will continue to flash for 3 ...
Question about Springfield Measuring Tools & Sensors
...channel I have tried to follow instructions from instruction sheet but outdoor temperature will not stay on display The same as when you have two radio stations on the same channel or frequency. The ...
Question about Measuring Tools & Sensors
...temperature data. Also, the Acurite instructions suggest use of lithium batteries in the transmitter where extreme low temperatures are encountered. My experience has been that the transmitter stops ...
...temperature again??? I have replaced batteries, have waited 10-min with batteries out, have poked reset hole. No change. Push and hold down the channel button, wait for beep, then on the sensor, push ...
Question about Measuring Tools & Sensors
...temperature. It is at close range. Change the channel switch or move the receiver away from any 2.4ghz equipment such as routers wifi phone stuff that channel hops as this is usually what interrupts ...
3 questions posted
Usually answered in minutes!