Minolta Maxxum HTsi Plus 35mm SLR Camera "film advance" Questions

Film advance lever I have a Pentax K1000 film camera and the film advance arm will not move so that i can advance the film. It was working just fine and then it wasn't. There is currently no film in ...

Fuji film advance does not work you can advance thru a whole roll of film. The pins should engage after the 2nd pull of the film advance but it does not. sounds like the film advance motor died

film advance is very loose, i load a film but cant seem to advance the film, not really sure if how to tighten it if its even possible. Hi., rotate the rewinder clockwise until the film will tightened

Film Advance Perhaps this isn't a technical problem, but a problem with just not knowing how to manually advance the film. The film was removed in order to fix the camera, and in an effort to conserve

film advance lever. my film advance lever seems to be stuck. everytime i load my film the lever won't budge. Do you press the shutter button to release the lever for the next photo? That's how you ...

... You can safely remove the bottom cover to have a look. Once you have the bottom plate off you can move the film advance lever and check the movement on the bottom, there may be debris or a broken ...

...film advance lever and take a shot. You should see the shutter curtains open and then close a second later. Then advance the film lever again and watch to see that the sprockets are turning. If they ...

film advance is a battery necessary to move the film advance lever ? many thanks ! jc In most film cameras, a battery is not necessary to manual advance film using the lever. Your Canon AV-1 is no ...

...advance the film winder, click the shutter button, and repeat.  The two spools on the right side should turn, this is what advances the film.  If this is not happening, then there is ...

When you put the film in the meter thats shows you how many exposures you have left stays on the s instead of going to one. The film is being pulled properly and is acting normal but even the sound ...