...bulb greww dim then replacement bulb was also dim The ballast module is bad. It controls the lamp. Don't throw away the original lamp. Once the ballast module is replace you'll have 2 good
Question about NEC Office Equipment & Supplies
...and it says to use the arrows to adjust brightness, but doesn't seem to be working Appears bulb is burning out ? If this is a replacement bulb, is it a proper replacement ? Not all bulbs are
Question about Mitsubishi Office Equipment & Supplies
...bulb again. Unfortunately dim image is normally due to a defective lamp assembly. I'd recommend removing the lamp and inspecting its condition. You'll notice black corrosion build up or a ...
dim This projector is high time @17000 hrs but otherwise all fuctions work as per design HELP!!! I had this same issue and it was the bulb. We had 2 of the NEC LT265 projectors so we swapped the bulbs
...bulb) it was still dim. When I tried the bulb in a "good" projector the image was bright but it "flickered". I updated the "firmware" on the projector, it changed nothing. Is it the bulb or another ...
...dim. Is there a light bulb that can be replaced? I was doing research and the only thing I found looked like a whole bulb unit for lots of money! Unfortunatly I am unable to locate any manuals for ...
I have a InFocus IN35 w360, I have no idea how old it is, do you? The bulb had dimmed the other day and now it will not power up, is replacing the bulb the only thing I need to be aware of with this ...
...dim. The lamp replacement light is not on. Hi there Keep in mind that the light will only flicker if the bulb reaches a certain amount of hours or if it is damaged completely. Try taking out the lamp ...
Question about Sanyo Office Equipment & Supplies
...dim. I figured since the bulb had 2100 hours it needed a new one. I replaced it and same problem. The screen is so dim I can't use it. Any ideas? Thanks Joe ahhhhhhh it is the wall or the lighting in ...
...bulb life left, however it is so dim that you can barely read the screen. The various brightness sections in the projector menu don't make a big enough differance. Another projector with the same ...
96 questions posted
Usually answered in minutes!
41 Questions
39 Questions
27 Questions
39 Questions
25 Questions