NEC MT1060 Multimedia Projector "start" Questions

power start up problems sanyo plc-xp45 start up power problem, after change power area and the lamp is ok, The projektor have difficult to start up, after many trys I manage to start it, but why? This

Degrading picture with my Dwin projector When we first start the projector, the picture is fine. However, after a time (it was originally almost 2 hours, now the problem is starting after about an ...

I use the notevision xg-c50x with my classroom smartboard. The replace bulb indicator came on when starting then went out. The projector started shuting off. I replaced the bulb but it will not come ...

Status indicator blinks RED, not starting. On power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are ...

When I plug in the projector to the mains and to the computer then start the projector followed by the computer, the projector projects the image of the windows start up screen but once windows has ...

Starts to power on,then shuts down Unit plugged in and main switch on.Red "lamp" and green "ready" lamps on.Press "start" button.Red lamp goes off and fan starts.Green lamp stays on.Two seconds later ...

When starting up my HP mp3222, there's no problem. When it's running a couple of minutes, it's starts flickering en the colour changes to purple. What could be wrong here? When starting up

InFocus 4800sp Over heats and fans only run slow and only if you start them by hand Everything is clean, pulled 4800sp apart and started it, had to start the fans by hand and they run slowly. Removed ...

Temperature indicator turns on in my Epson EMP-500 Here is my problem: I connect the power cord and the power indicator turns on orange and the fans starts, then i press power button, the power ...