Question about Optoma Office Equipment & Supplies
...lamp when power standby button Optoma EP755, new lamp, when power standby button pushed, led changes from flashing red to solid red, lamp cooling fan does not start, no light from bulb. you need to ...
Question about Sharp Office Equipment & Supplies
...standby lamp and lamp indicator still remains on after replacing new lamp Have you reset the timer? Reset the lamp timer. ? While simultaneously holding down MENU/HELP, ENTER and R on the projector, ...
Question about InFocus Office Equipment & Supplies
...standby again, the lamp turns off after 15 minutes. The LED lights orange while the projector is in standby. The full manual can be found here: Infocus customer support Infocus LP350 Manual I hope ...
...STANDBY", "MENU" and "INPUT and plug-in the power cord 3. The lamp operation counter will automatically turn to zero 4. Check if the lettering "0H" appears on the lamp operation counter in the status ...
...counter in the status display. 5. After the lamp operation counter has turned to zero, turn off the projector by pressing "ON/STANDBY" and unplug the device. The lamp reset procedure is over. ...
...STANDBY", "MENU" and "INPUT and plug-in the power cord 3. The lamp operation counter will automatically turn to zero 4. Check if the lettering "0H" appears on the lamp operation counter in the status ...
...standby light is orange temp and lamp light not on hi, Just try to reset the lamp hour of your projector. For resetting the projector do the following. While simultaneously holding down MENU/HELP, ...
Question about Sony Office Equipment & Supplies
Lamp /Cover LED and Power ON/Standby LED flashes. Sony VPL-EX1 turns on for a few minutes and then the Lamp /Cover LED and Power ON/Standby LED flashes. I have cleaned the air filter and also reseated
...lamp shuts off, and it goes into standby, but you cant get it out of standby. Hi there Have you replaced the lamp ? If you haven't - take out the lamp and chech for any irregularity on it - i.e. - ...
...of beeps. Turn on power using "ON/STANDBY" button and check that "0H" appears on the lamp time in the status display. Turn off projector using "ON/STANDBY" button Unplug power cord. I hope this
37 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions
