Hayward 1 12 Hp Super Swimming Pool Pump Sp2610x15 "pressure skimmer" Questions

...pressure drops as water leaks around the clog. Pulsing it means to turn the water on for a few minutes, then turn it off. Then, turn it back on, and then turn it off again. Look down into the bottom ...

...pressure when i plug in vaccume but skimmer works if you are using a vacuum adapter, be sure that the drain opening to the skimmer is closed. there should be a little flap door that swings over the ...

...skimmer hose collapses significantly when I attach the Kreepy Krauly. The pressure on the pump seem unaffected but am concerned about the hose collapsing so much... There is variable suction valve ...

pressure. Went to clean pool and I found I had not enough suction with vacuum to pick dirt off bottom of pool. Filter does not need to be back washed. New sand was put in with spring start up. None of

...skimmer, can you shut the bottom drain off? Have you checked your impeller for hair clogging? What about your filter, if sand, have you back washed? What is your discharge pressure? If DE, how is the ...

...pressure and the jets go off. You need to check the door on the skimmer and the water leavel on the pool. If the door is stuck or the leavel is low the pump will **** the skimmer dry and cause the ...

...skimmer, then you have a suction port in your pool. Let that suction port suck some larger debris that would stay in the basket. Again, you will prove or disprove, whether debris is getting to your ...

astral pool pump goes on but does not get the pressure to the filter. If you take the pump apart and put it back together, it will work until you turn off the pump again and then try to restart If the

pressure. if you are talking about when you move the little 'door' at the bottom of the skimmer, if you put it over the supply port to pump, there will obviously be no water flow and again no pressure