Husqvarna YTH21k46 motion drive belt pops off input pulley located under transmission cooling fan when clutch is engaged. Should I be able to rotate the input pulley by hand when the freewheel control
what is a hydrostatic transmisson? Hydrostatic transmissions are automatic "Hydraulic drive" transmissions. The largest producers of hydrostatic transmissions are Hydro-Gear, Tuff Torque and General ...
problem with left side hydrostatic transmission on my 2005 cub cadet zero turn my left wheel will stop functioning after about 45 minutes of use. I can wait about 30 minutes and it will start ...
transmission wont shift into first gear It will drive in second and third but first is like it's still in neutral. Transmission may have lost 1st gear, check transmission dip stick if there is one and
...small pieces. Next remove the height adjuster. You will see the tension sping, remove it from the transmission, this allows you to rotate the transmission and remove the belt. Then remove the nut
Transmission will not engage on Craftsman Model 536 279 320 ridung Lawn Mower. Hi, W/D here. Look at the very rear of the mower for a slot that resembles a keyhole. There will be a rod in or behind ...
Question about Cub Cadet Garden
Looking for when the oil and transmission should be changed on Lt on model LT1045 hours to change oil and transmission Hey, Many manufactures recommend a engine oil change every 50hrs more often in ...
...not engage The bekt is in place and the pulley is turning but the shafts coming out of the small transmission are not turning. Gogs (or gears) in the transmission box have worn down. It is
Question about Garden
Why won't my transmission re-engage on my Dixon Speedztr 30 lawn mower? I disengaged the transmission using the levers by the back wheels; I re-engaged the transmission, and now I get no response from
488 questions posted
Usually answered in minutes!
122 Questions
62 Questions
64 Questions
42 Questions