Pentax IQZoom 90MC Date Point and Shoot Camera "film spool" Questions


Question about Photography

1 Answer

film spool on left side and at the right side insert the film strip on diagonal small hook, turn the spool rachet turning left side then click shutter twice while holding the spinning spool left side


...on.  If it does not, then you have not engaged the film in the take-up spool properly. Pentqx slrs need to have at least two wraps around the take-up spool to avoid failure of the film ...


Question about Nikon Photography

1 Answer is aligned with the red mark ( close to the pick- up spool ). If this is not your problem then you will have to take your camera in probably because it looks like the spool motor is not turning ...

Question about Pentax Photography

1 Answer

...Could you be putting too much film onto the wind spool? Take the end of the film leader no farther than the RED/ORANGE marker at the spool. Too much film will cause it to bind and start

...get damaged film off the take up spool just press the film return button, the one you would press the rewind the film into the can at the end of the film. It is on the bottom under the sprocket soon as i shut the door When loading film, make sure to draw the film all the way to the receiving spool. If you don't pull the film far enough the camera thinks it's empty and rewinds the spool its self. I placed the film in the correct sprockets but when i try to advance, I can't get the crank to advance a long with and I end up spooling out all this film that can't be advanced ...

o_ _' shows that the film is loading. Apparently the film has not gone to the receiving spool. Pull the film all the way over to the other side when loading the film and make sure it catches the spool

Question about Noblex Photography

1 Answer spool supposed to spring load also? Mine isn't and I cannot get the rigid empty spool into the right hand side...what am I doing wrong? Does the wind handle lift up like a 35mm camera? Or, some ...

Question about Konica Minolta Photography

1 Answer

spool. I think the film isn't out quite far enough for the camera to do its auto load thing & when you close the back it goes thru its auto loading motions but the film just isn't getting loaded. Then

Not finding what you are looking for?
Pentax IQZoom 90MC Date Point and Shoot Camera Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Pentax Photography Experts

Cindy Wells

Level 3 Expert

6559 Answers

Brad Brown

Level 3 Expert

19165 Answers


Level 3 Expert

3290 Answers

Are you a Pentax Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides