winder jammed part way through a roll of film. Nothing will move it. Is it the viewfinder or the film advance lever? If the viewfinder is not showing any image and the shutter is not getting released,
Minolta x700 winder broken off camera My film advance lever has popped out of my Minolta X700 cameras body. The shaft is still attached to the lever. What can be done to lock it back in? My power ...
...I had not used camera in a couple years. I pressed shutter release and tried to advance the film winder. The winder has stopped and winder advance handle is now loose. Mirror is stuck in up ...
...winder to cut down on the size of the camera. Hope this helps someone. Take care & Happy Imaging! Yours truly, Glen :) Hello Gabe529, As I recall, this was Pentax's way of mating electronics with ...
...something else? This has happened with my pentax super program. All that was wrong is the the spool/winder was dirty. It needed to be cleaned. You open up the back of the camera. Stick something such ...
camera repair The film winder does not work. Have tou tried the battery? Is so try clean the battery contacts make sure theres no old residue on them
...winder is coming back it automatically clicks . I can see the shutter clicking with out my doing so . Hence I am not sure if the next frame is loaded or it has clicked. I am wasting few shots every ...
...winder should make a full turn when winding but sometimes it only does half a turn or even worse, not move at all. Sent the camera to the local repair shop and they said its normal. Is it? =/ And ...
winder is turned. You are pulling with only spool so it is irratic on winding. Solution: Replace sprocket unit. It probably cost you around $100. Any local repair facility should be able to service it
130 questions posted
Usually answered in minutes!
101 Questions
31 Questions
21 Questions
19 Questions
14 Questions
