...film the winder does not spin. The film seems to be advancing, but the winder doesn't spin...till around shot 6 or 7. Then it starts to spin. Is this ok? Normal? Thanks! It is probably that the film ...
...film winder jammed. The film winder jammed part way through a roll of film. Nothing will move it. Is it the viewfinder or the film advance lever? If the viewfinder is not showing any image and the ...
winder which pulls the film after a picture is taken.Good luck! are the teeth on the winder spool intact , also check the holes in the film havent been torn , this can happen when the film is stiff to
at the time. Is that mean the winder has problem or because of no film loaded. Thansk for your help Van It should stop advancing the film when the camera counter is on #1 exposure with or without film
...film,you need to pull the roll winder upwards. While you pull the winder upwards, it would have a tuck voice and then the back cover would open up. Make sure you have wound the entire roll before you ...
film winder from turning. Now turn the top of the winder off while keeping the bottom part in place. Be very careful not to close the back of the camera while you do this. Once you have it out give it
Question about Nikon Photography
frame in my Nikon N65 The Nikon N65 has a built-in film advance (power winder) so all you need to do is take a photo and it should advance. If no, the film isn't loaded properly or the drive is broken
...film until the winder leaver stops check the ASA or IOS rating of your film from the box it came in. and ensure this setting is correct on the setting wheel on the right. if your camera has automatic ...
Film winder is loose and meter is not accurate. Hey all, hope that you all can help me with the problem I'm facing with the Nikon FE. It's my dads camera which he bought in 1978 and it has not been ...
130 questions posted
Usually answered in minutes!
101 Questions
31 Questions
21 Questions
19 Questions
14 Questions
