Mitsubishi HS-U447 VHS VCR "timing 1 motor" Questions

...1 hour, but I still can't eject it. Time the tape stuck: somewhat before 7:00 PM Time this problem submitted: 9:40-9:45 PM Time zone: Central European Summer Time (CEST) UTC+01:00 Daylight: UTC+02:00 ...

...1 second before shutting itself off. Hi, This is a common problem with some VHS units. The problem is that the tape does not fully extend over the video head and the slack sensor shuts the unit off. ...

1-800-SAMSUNG good luck VCRs are both mechanical and electrical. Mechanical things usualy fail in these first because of wear and heat. They use this thing inside called a mode switch. What it does is

rca vhs vcr model vr355 Vcr will not play, record, rewind, or anything. When I turn it on it stays on a couple of seconds then turns off. My tape will not eject. The clock stays on but that's the only

RCA's save button My vcr does not want to work. I put the tape in and it doesn't do anything but says save on the screen (of the vcr). What can I do to it so that it can work? Is their a button I have

...1. There is a rubber wheel called a "pincher wheel" that compresses the tape against the "capstan". The capstan is a shiny metal spindle connected to a motor. The pincher wheel can become worn and/or ...

1) or (2), above. Or, it may do almost anything. See the section on: "Erratic behavior in various modes". 4. Some other condition such as the end-of-tape sensor thinking that you are at the end of the

Motors starting to whine. Would like to keep this VCR a couple more years. What should I lube with? I just use good old 3 in 1 oil, however you are going to have a hard time getting it down into the ...

What is the fix for error 20 cassette compartment motor out of time please help me how i can fix it ? SONY PVW 2800P VOLUME 1 SM Service Manual free download schematics eeprom...

...1 on the motor drive board mounted to bottom of dv mech. it is a 10 pin ic labeled xra6887. i have not located a source yet but you can confirm the chip is bad by replacing it with ic6502 on the same ...