Mitsubishi HS-U781 S-VHS VCR "tape goes machine down" Questions

...tape, the VCR knows you have reached the end and goes into rewind, when it sees light on the left side, it knows you have reached the beginning of the tape, and stops rewinding. This sensor is also ...

...tape goes to the top). It stays there for a few seconds, and then the machine completely turns off. The tape still plays, I just can't get it out, or get it to stop turning off when I try to take it ...

tape, the spools slow down and stop. The VCR then goes into REWIND automatically. The cassette also stops when there is a change from an LP to an SP recording and vice versa, and stops and switches to

...goes off after a few seconds after turning on & eject does not work Best to get the service manual, this will explain the best way to get the tape out of the machine without causing further damage to ...

...Tape will not eject,rewind, FF, Play...have reviewed all troubleshooting items in manual and it still does not respond. When powered up it goes on -hit play and in a few seconds shut down...believe ...

...tape, the show goes to commercial, the commercial advance kicks in and fast forwards, then the fast forward slows down to hunt for the place to begin regular playback, then the vcr shuts down. I turn ...

...TAPE AND GOES OFF AS SOON AS I TRY TO LOAD THE C.TAPE. VCR's have a thing called a mode switch. This tells the electronics of the machine want position the mechanical section is in. If it gets wrong ...

...longer as the temperature goes down.. they have a chemical inside that dries up... so the machine may need overhaul. but an old tape can cause this, a worn & dirty pinch roller can cause this

tape until the end; THEN it springs into life and goes << into its usual "warp speed" rewind and is totally accessible to all controls. The trouble is, I imagine, that the NOISELESS slow >>

...goes from FFWD, REW, Play to stop, there are a pair of "brake pads" engaged to stop the reels, and prevent tape spillage out into the machine. These pads, often rubber like, are on levers which ...