Mitsubishi WS-55511 55" Rear Projection Television "status light blinks several times" Questions

...light and the caps are bulging you have other components that have failed and need replaced as well. If the bulged caps do fix the problem it will only be for a short time and will fail again. There ...

Status Light is constant red - I have already changed lamp. No Picture - How can I fix? Press the Menu and the Device/input buttons both in together and see if the led blinks the two digit code of ...

...status led blinks, and sometimes the time led blinks, and sometimes after several attempts the tv turned on for few minutes then shut down by itself. I tried the reset button and hold the menu button ...

...status light will blink two numbers. ex. one flash pause two flashes is 12 Error Code Probable Cause 12 No error detected 22 Recovery from momentary Reset 32 Lamp Cover open 33 Air Filter Cover open ...

light does not go off and it still tells me that I need to replace the bulb. could you provide me with an updated link? Thanks [email protected] Good Day; 1. Check for an open AC fuse F9D00, if

...status light flashes 11 times then stops then does it again.Tv doesnt turn on. do me a favor, when set shuts off, press and hold menu and input buttons on front of set for five seconds and release ...

...light comes on then immediatly off with three red blinks then a few seconds 3 red blinks again Self Diagnostic check is as follows: press display, 5 button, volume down then power... execute this ...

...light blink very fast,no picture. How can I tell if I need a new picture tube or power supply board or both? IS this something that needs to be fixed by a repair shop or something the average person ...

...status' light alluminates 4 times an then the red 'status' and green 'timer' light alluminate repeatedly and do not stop untill tv is unplugged. We cannot seem to find the code for this and are very ...

...Status led will then flash a two digit code. Example, if the error code is "23" the led light flashes 2 times(blink, blink) pause and then flash 3 times(blink, blink, blink). Let ...