Question about Mitsubishi Televison & Video
...error code 23 - Service manual, repair and ... forum.eserviceinfo.com/viewtopic.php?t=81051 Oct 24, 2010 - 10 posts - ?4 authors Tv is old about 10 years. Shows error code 2-3 horizontal deflection ...
Question about Mitsubishi Televison & Video
error code 23, Horizontal Deflection failure...tv won't turn on. ctf1800 told me to check the error code & it is 23=Horizontal deflection failure. What should I do now? Can I fix this myself easily? I
Question about Mitsubishi Televison & Video
...for about 8 second. power led will start to blink error code 12 ok 22 dead short 23 deflection failore 24 vertical failore. after you know error code have electronic technition repair for you.
...error code 23. It turns on for bout 4-5 min and shuts down! Not sure what to replace? Error 23 means a fault in the horizontal deflection circuit. Its part of the HV circuit that drives the CRT. ...
Question about Mitsubishi Televison & Video
...code it gives me with (the input and menu key on the fromt panel depressed) is 24, vertical deflection failure. I have got the VZ9 schematics. I know this TV is a VZ8 chasis but was not able to find ...
...Error Code Operational Check will begin, utilizing the 'POWER ON' LED (the green 'POWER ON' indicator light). There will be a pattern of two sets of flashes, with a pause in bewteen flashes; this ...
Question about Mitsubishi Televison & Video
Error code 23 on Mitsubishi WS-55511 My rear projection television will boot up by having that little green flashing light for about 70 seconds then i try to turn it on and the green light stays solid
error code. The TV must be in shutdown and then press the front panel "activity" and "channel down" at the same time and hold them for 5 secs. Led light will flash 2 digit code separated by a pause.23
Question about Mitsubishi Televison & Video
...Error Code Operational Check To activate the Error Code Mode, while the set is OFF, press the front panel "INPUT" and "MENU" buttons at the same time and hold for 5 seconds. The LED will flash ...
...error code Error Code Probable Cause 12 Normal Operation - No Error Detected 21 X-Ray Protect 22 Short Protect - likely convergence IC failure 23 Loss of Horizontal Deflection 24 Loss of Vertical ...
721 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
562 Questions
482 Questions
301 Questions