Mitsubishi VS-60609 60" Rear Projection Television "reset button" Questions

...button to "Reset" listed on the display. 3. Press the "Volume+" or "Volume-" buttons to move left or right to enter your Reset selection. The Reset will reset all of your picture adjustments, ...

...reset button located on sony tv kp-46wt510 No button on the main board. But, you can reset the TV by holding down the 'Reset' button on the TV remote and then pressing the 'Power' button on the TV ...

...reset the lamp hours, press the SELECT button (the one between the four arrow keys with two concentric circles on it) on your remote. 11. It will ask you to confirm the reset--press SELECT again to ...

Press and hold volume down button on tv front and press and hold split button on tv remote for at least 6 seconds to reset lamp hours timer. TV will show you confirmation screen about lamp hours reset

...reset by the remote but it does not allow. Can you tell me how to do this, Regards CJ press the menu button on the front panel while holding button on panel press and hold the menu button on the ...

...Defaults: Turn ON the TV while Holding Down the "RESET" button on the remote control, Press the POWER button on the TV. The TV will turn itself OFF, then back ON again. Release the RESET button.

...ok" button, scroll down to "reset lamp timer" and press "ok" button, you will notice the "no" change to "yes" and press "ok" button, you will notice "yes" change to "no", this will reset the lamp ...

...OK or enter button. Lamp time will be reset. Where you got new lamp, should have information on how to reset timer for New Lamp.If i can find my information on resetting timer i will post it for

...reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time. Figure 1: Example of the reset button labeling on the ...

button that says: "System Reset" it's recessed to you need a pencil or a pen to push it. Push it, let the green light flash for up to a minute and then turn your set back on. If that doesn't cure your