Mitsubishi VS-50607 50" Rear Projection Television "bad" Questions

...replaced ic chips and resistors but have a bow in my screen now could my 150ohm resistors be bad The 150 never seem to fail, either new chip bad, you missed a bad resistor, something during ...

my tv shuts off by itself and wont stay on for more than 10 seconds What's the make and model? Many things will cause this...bad solder\bad relay\diode going bad\capacitor going bad. barneyluc

Glowing resistors. What causes the resistors to glow red and is this a bad thing? If it is a bad thing what further damage can it cause? yes that is bad probably bad caonvergece ic's resistor is 6'8 ...

...off and tried again twice then stop . thanks alot of things can cause that symptom, usually either bad solder connections or bad capacitors on the deflection board, a bad flyback transformer, or a ...

...ehen the voltage on the screen driver is set out of spec, or the plasma screen assy is going bad, 90% of the times that I have adjusted the voltage the sparkling effect came back, indicating ...

...power button no pic or volume comes on and the power button just blinks Different possibilities: 1. Bad hv circuit (flyback) 2. Bad connections on flyback & the little fuse next to it 3. Bad fuse ...

...colors you can't notice. Anybody ever see this issue before? This is caused by one of two things; a bad LED grouping (most common cause) either because the LEDs are bad or the power distributor fuse ...

...you hear relay clicking it turn on then turn back off (green power light turns on and off with it) Bad output chip? Bad connections? Programming ? Comment by LOVE DADDY, posted on May 08, 2008 Hi ...

...My TV turns off after a bit. It goes flickers black and then turns off. Is this an indication of a bad power supply or a bulb going bad? No, check cp150 capacitor 2200uf 16v if bubbled up on top it ...

have sound but onl see top of pictre and is blinking with a humming sound in back of tv You have bad grounds on the power supply board. There will be many of these on the bottom of this main board. ...