John Deere Gx75 Rx75 Srx75 Sx75 130 9hp Starter "speed" Questions

Adjusting variable speed pulley in riding lawnmower How do you adjust a variable speed pulley on a cruisematic white LT15, Model No. 13A2682F190? I tried freeing up the variable speed pulley - Now it ...

I have a DYT400 with a Briggs and Straton Intek plus 19.5 ovh. When I move the speed lever to full speed, the mower wants to choke out. Also, when I put the lever on stop, it just keeps running. the ...

yardman mower wont run in lower speeds how to adjust yardman will only run in the top 2 or 3 speeds, will not run in lower speeds. Have changed the 2 transmission belts and didnt help. still only runs

i seem to have lost about a level and a half of speed. i.e. speed 3 is like previous speed 2, speed 4 is only at an actual speed between 2-3. all undercarriage is clear, motion drive belt is good ...

I have a 1997 MTD 600 series with 18.5 hp(7 speed) that I always used to pull trailer with light loads for various projects on our 10 acre property. Trouble seemed to started a couple years back when ...

John Deere 430, Sundstrand series 15-U hydrostatic transmission. The tractor, at low ground speed, surges as it moves, in both forward and reverse, at any engine speed. At full ground speed, the ...

...gear but does not move how would you adjust levers If you have different levers for direction and speed, try starting mower, with transmission in neutral, move the speed lever to fastest speed and ...

Speed control will not change speed Changing speed on speed selector will not increase or decrease Check all linkage from the throttle to the carburetor . Sounds like something has come undone or ...

Mower only moves in high speed The mower only moves in high (5) speed when engaged. is there a way to adjust the cable or linkage to get all five walking speeds? I have the technical manual for this ...

Ground speed slows under pull at high variable speed settings. MTD model 14AJ84AH062 With variable speed drive in high gears the tractor slows to a stop. Front belt seems loose. Take off the plate ...