...flickering. Is my TV hosed? Thanks for any help Justin Sounds like you have an intermitant overdrive situation on the red CRT. This could be caused by a bad component on the Red CRT board, an ...
...? Did he cover the CRT leaving a good red & green video with no flickering or did he cover the red & green and observe the flickering in blue...? Did he discuss the hyper module with you
...flickering and the lines are curved...!! Is my problem a lamp fault, projector problem, convergence problem or something else?? If the lines are slightly curved and stationary on about 2/3 of the ...
remove the little board on the middle tube then restore power. If TV stays on more then likely the CRT is bad but not always the driver on board could also be bad, check voltages. Good Luck, big IRISH
Question about Televison & Video
...CRT TV just lost the picture on all channels but has sound. The screen has one blue, green and red line at the top. The rest of the screen is black. The picture occasionally flickers on and then ...
flickering. Does that mean the bulb needs to be replaced and if so does anyone know how much and where to purchase them? Thanks Aimee No, this could mean a loose connection on crt board(red of course)
tv and the blue blub is flashing slightley, it dont do it all the time, i looked inside and the red and green blubs are ok but some times the blue one flickers. I would check the CRT socket module for
CRT board in reverse position to apply a voltage data. Power on the TV to start a voltage data.Use a multimeter (range on DC) then place your black prob(-) to the ground of the TV and the other one is
39 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions