Mitsubishi VS-5043 50" Rear Projection Television "power not turn" Questions

turn back on. After that when I pushed the power button flashed a green light on the power for a second but nothing turns on. Remote does not turn it on at all. Now even the green light does not flash

...turn on when the power button pressed. I can hear the TV turn on with a blank screen and no sound. The green power light button blinks constantly untill I turn it off. If you can help it would be ...

power to tv but will not turn on We had an electrical storm in our area and now my tv is not turning on. The tv and other power cords were connected to a surge protector. There is power to the tv, but

turn off the power-bar if one is in use. 2. Press and hold in the products power button for 1 minute to release the retained electricity from the capacitors and circuit board. 3. Plug the product back

...turn back on; powered unit off, then on - no help. Press power switch and power light comes on momentarily and then turns off, picture does not come on. unplug unit. wait 2 minutes. plug back in. ...

...turn the main power off, then back on, and the power goes on. But then 1 second later, the tv turns off, but main power still on. Thanks for not including a make and model #, it makes it so much ...

...turn the power on, the t.v turns on for awhile then turns off. Its not set up on a timer to turn on and off. some time it plays for 5 minutes then turns off, other times it plays for an hour or so ...

turn power button on you hear relay clicking it turn on then turn back off (green power light turns on and off with it) Bad output chip? Bad connections? Programming ? Comment by LOVE DADDY, posted on

turn on no power to light hln567wx/xaa does not turn on no power to light led did you check the power supply board this could be the main issue Samsung hln567wx/xaa does not turn on no power to light?

turn off the power-bar if one is in use. 2. Press and hold in the products power button for 1 minute to release the retained electricity from the capacitors and circuit board. 3. Plug the product back