Mitsubishi VS-45605 50" Rear Projection Television "ws 55819 tv red" Questions

...WS 55819 with a convergence I have a Mitsubishi WS 55819 with a convergence problem. I have replaced both of the STK392-570 ICs.Now the blue Convergence will adjust but the red is still bowed at both ...

...WS-55819 intermittently has horizontal convergence issues. After the television is on for a while, the convergence remains OK in the center of the picture but towards the left and right sides of the ...

...IC's for reliable repair. Part # Stk392-110 X 2. Let me know if you need more help...T. while watching my ws 55819 mits, it went from a color set to a black and white whats wrong help ...

i have double vision and red on screen. any idea? Could be a problem with the convergence IC's or a resistor(s) / capacitor(s) around the IC's. I suggest calling a service guy and getting the TV fixed

TV the red popped out of place so I turned o The TV has had about 1000hours on it in our house and was used before that. We have had to replace the convergence chips before we could use it. Likely has

...WS-55819, (correct model # this time) that replaced the convergence ICs (801, 802, original Sanyo chips, not knockoffs) and the Pica fuses for the infamous dead set, code 2.2. When I when I went to ...

tv.manualsonline.com/manuals/mfg/mitsubishi/mitsubishi_platinumplus_series_ws_ws55819.html?p=13 see page 13 of this manual, you do not have an HDMI input to your TV & will have to choose either #6

...tv is on for about 10 minutes the colors get al blury and almost looks like 3D without the glasses.It is nine years old Model number WS-65819.It doesn't clear up Your Convergence ICs are likely ...

TV where it will go out of convergence (especially the red) and go to a bow-tie geometry. It appears something is loose in the TV as you can jostly the tv a little and the picture goes clean. Any idea

...WS-55819 uses two of the STK-392-570 CONVERGENCE Ic chips. If convergence is skewed and or will not adjust in some area both chips and any of the 3.9 ohm blue protect resistors right in front of them ...