Procom ML300TBA Heater "light gas ventless" Questions

...light goes out when you turn the knob to "On" (otherwise it will burn all day) - sounds like it could be a faulty thermocouple. I was told by the supplier that with a ventless unit you are not ...

light will stay on until I turn the heat control from pilot setting to low or above. Try to take pilot assembly apart and clean real good. This will work most of the time. If it does not work for you,

...gas valve knob on turned to pilot while pressing that down while pushing the spark it should light or it is tripped on a safety like rollout switch or oxygen depletion sensor if equipped which all ...

...ventless gas logs (set to burn on porpane gas). Pilot lights, but not logs. I have Emberglow ventless gas logs (set to burn on porpane gas). First I connected them to a propane 20 lb tank and they ...

gas heater. the pilot lights just fine then the pilot goes to a small bulb of a flame and then turns off. pretty much the same happens if I try to light it manually. I have cleaned everything like the

...light, sems like gas is not geeting to logs we have the ventless gas logs natural gas. when we try to light, nothing happens, it is as if the gas is not getting to the ignitor area, any suggestions ...

...gas arrives, the lighter will light it. After the pilot lights, you will have to keep the button pressed long enough for the thermocouple to get hot enough to set the pilot to stay on. When it is hot ...

gas heater after it reaches temp, the pilot light goes out. I have had a Charmglow for about five years and was doing the same thing. I called a plumber that worked with gas fireplaces and he came out

...gas heater will not light I have a good pilot on the heater but when I turn the control to light the burner, the pilot gets smaller and the heater won't light. The heater has ceramic tile and the ...

...gas Pilot light stays lit various times, sometimes for several days then other times for a few minutes. Lights best when temp outside is below freezing. Pilot flame appears to receive too much air. ...