Question about Televison & Video
...convergence not to adjust properly the red on the convergence adjustment screen will not adjust properly. When the tv is turn off the on again it will change position on the convergence adjustment ...
...convergence and follow the steps above to adjust the blue pattern. 8. Press OK to exit. You will be asked if you want to save the adjustments Yes Saves adjustments. No Returns to the Advanced ...
...adjust the green convergence,or is there another component failure I should look into? If the screen is out of focus you probably need to adjust the focus on the focus block it is usually located ...
Question about Samsung Televison & Video
...adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets ...
...adjust convergence. I just get a black screen. I was reading about how I have to save my setting to memory, but I dont't know how. I start by pressing the service sw (s801) button on the convergence ...
Question about Philips Televison & Video
...adjust the red convergence but it will only adjust side to side. The blue convergence will adjust fine. You have convergence output failure. The output ICs will need to be replaced and possibly a ...
Question about Toshiba Televison & Video
convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them in all directions your convergence chips are
Question about Televison & Video
...not on menu. Screen looks 3D Colors don't line up One or more colors can't be adjusted when using the convergence menu. Screen is bowed or warped. then, it need to adjust from the inside
Question about Philips Televison & Video
convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them in all directions your convergence chips are
Question about Mitsubishi Televison & Video
...adjust for red convergence either. Replace the convergence ICs your model uses two STK392-040 Convergence ICs. You can get replacements at the following link with instructions. ...
104 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions