Mitsubishi VS-50605 50" Rear Projection Television "ws 55311 problems" Questions

...ws-55311 turns on and then turns itself off ws-55311 turns on and then turns itself off in 3 seconds or so. wont stay on no, if blink code the problem is in the TV set--cable will not cause this type ...

...ws 55311 format issues I got a used Mitsubishi ws 55311 and so far I love the upgrade. The only problem that I have is I can't seem to adjust the format from 480i Stretched when watching standard ...

ws-55311 shows blue screen on all inputs except the DTV input not a single input shows anything but blue screen except the DTV input. the menu and volume and all those functions work just nothing from

...WS-55311 won't turn on. Only the green light blinks on for a second the moment you plug it in. Then you press the power button and it does not turn on. Nothing happens. Help somebody.

...ws-55311 NEED A MANUAL ALSO This is a common problem. Its called a convergence failure. Problem #1) Convergence Symptoms: Screen Looks 3D Colors wont align Video may look distorted You can see some ...

...WS-55311 flashing screen Until now this TV was working perfectly. Recently, from any input setting it will suddenly flash a blank screen (all black) in a pulsing manner but in irregular increments in ...

shadows or lines around objects This tv have a problems known as a conveegence problems,it dead.The tv convergence board must have it 2 STK convergence ICS and some or all it resistors to be replaced ...

error code 24 What does error code 24 mean? TV powers up and then powers down again after few seconds. 2,4 is one of 5 error codes and means:2 blink-then 4 blink---------vertical circuit problem The ...

blinking screen You have a problem in the horizontal deflection board. It will start with bad capacitors and poor grounds. You may also have a high voltage switching transistor along with one or two ...

...ws-55311 my tv WS-55311 has a problem it dosen't turn on, every time i try to turn on, the green light blinks twice and turn off, sameone in this forum suggest me to replace the power board for a new ...