Mitsubishi WS-55819 55" Rear Projection Television "solder bridge red points" Questions

red and blue colors diverge out. When I try to manually correct the divergence, the "lines" that need to be centered seem to already be centered since they are located in teh center of the screen (i.e

...solder with the best of them. Putting the new chip in went flawless...no bad traces,bridges,etc. I turned the set back on, only to find the same problem, Red won't move and Blue moves fine. O.K. does ...

...red and green ghosts of increasing severity. A new tv is not an option at this time. We replaced the convergence and all seemed to go well. However when turned on, no picture and the on/off light ...

solder joint should look like a little “Hershey kiss.” Be sure not to run over onto adjacent pins and bridge the joints. I didn't have any trouble here, so I can't comment on how you would fix

solder joint should look like a little “Hershey kiss.” Be sure not to run over onto adjacent pins and bridge the joints. I didn't have any trouble here, so I can't comment on how you would fix