Mitsubishi WS-55311 55" Rear Projection Television "not power" Questions

NOT POWER UP Hi check power supply if you have power on it check power button if is not working try unplug it and connentit after 5 min if it is not sturting you need to replace power transformer Hope

...power supply but the tv not on or function Accroding to your model number:(KV-...) In sony tv units power supply porblems is very low unless a power surge. You have to check these things. 1. Stand by ...

...not display power it usually is as a result of the power supply unit in the box being faulty. The component inside the unit which is responsible for the distribution of power inside the unit. Once ...

...not making it to power on.First, remove the unit's power cord from the wall, wait for about 30mins, then plug it back in.  If it doesn't power on, plug it into another outlet, to make ...

...not power up make sure outlet is working, use an extension cord or move tv to another plug if outlet does not have power, assuming you have power at the outlet, unplug tv and hold power button in for ...

...not power on but you can hear static coming through the speakers. The power button will not light up Hello, The problem with the television is from the power panel of the television, it is receiving ...

...not power up replaced lamp light no longer blinks but still will not power up First check the power supply of your TV,multimeter the export voltage of power supply.if it is defective you can replace ...

...not power up when turned on after a power surge occurred. Prayfully the fuse inside the tv took a little shock and broke ...if not that would leave the transformer or the board took a surge also but ...

blinking green light, will not power up suggestions on fixing this problem TV will not power up.Power light just blinks.Possible bad power supply? you do have a bad power supply

...not power up. It seems to try but cannot TV will not power up. It seems to try but cannot complete power up. Is this a power supply problem? Yes,must replaced the power supply board to solved this ...