...low or missing suspect the reset switch S7L20 part # 432P109010 on the Control PCB. 3. LED does not stop blinking after plug in. Verify the standby supplies, 12-volts at connector KA pin 17, 6-volts ...
...low state at the same time; it is classified as no high voltage of the lamp driver problem. Troubleshooting Tips: 1) Confirm that the 5 pin connector on the rear of the lamp is securely seated 2) ...
stop. The flickering get less pronounced but will not go away. I have all the voltages at the power supply In fact I changed the power supply but didn't help. It flickers without or with an input. The
...low voltage supplies) 2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection) 2 - 4 = Vertical protect (usually loss of vertical from the source) Then, let me know what ...
...low suspect problems with the switches/buttons on the Control PCB part # 935D776001 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at ...
325 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions