Mitsubishi WD-52327 52" Rear Projection HDTV-Ready Television "fan coming tv model" Questions

...fan kick on however I hear a distictive buzzing sound coming from the lamp area. on that model its possible for the lamp sockets from the ballast get pushed back inside the tv. Remove the bulb and ...

...tv off, hold down device and menu buttons on the front for 5 seconds, you will get a code flashed out through the LED's.. the codes are as follows: 12 No error detected 22 Recovery from momentary ...

...coming from fan i have a 52" mitsubishi dlp tv model num wd-52525. when i turn it on it some times makes a sound like there is something stuck in the fan.and also the screen will not come on at all. ...

...fan motor goes out. TV repair man comes gets fixes it works great for 3 days NOW tv went off and red light blink 3 times then stays solid then blinks 3 times (repeats) can anyone give me any ideal? ...

...fan. Doing this every 3 to 4 months will extend the bulb life. The little red lamp light that is coming on is an indicator that the bulb needs replaced. Make sure you DO NOT touch the bulb with your ...

fan. any suggestion; where can I buy parts? is there any service manual online (pdf)? I appreciate any help I can get ! Bruce the code you said is not a code. What is the model # of your tv? Press and

TV goes on green light stays on no video about 10 seconds then goes to red lamp light Mitsubishi has problems with the thermal sensor going bad. They extended the warranty for several sets. The sensor

...fan kicks in and tv picture starts. I checked the brojector bulb and it isn't red. Model No WD-65732 You have a bad ballust The power supply has a weak capacitor.(The power supply board has the power ...

...tv will not turn on. It is a 52" (I think) DLP that I bought approx 4 years ago. There is a small light under the word "Timer" that keeps blinking very quickly, but the power will not come on. If you ...

...fan running and all, but the picture will not come up. The lamp is in perfect shape. Pull Lamp Out and see if when you try to turn it on if the Ballast Board has a spark/arking noise coming from it? ...