Mitsubishi WD-52525 52" Rear Projection HDTV "won power" Questions

...won't power on. Replaced the power board with one from Mitsubishi and it still won't power on. Help!!! These tvs are known to have sensor issues. EX: door lamp sensor failure. Thermal fuse ...

...wd-52525 tv won't show picture, sound is ok. i replaced the lamp, same prob. so i replaced power ballast, still got same prob., help? ck for the 330v ac going to ballast from power ...

...power on. We have had not problems to this point, it just won't turn on by either converter or using the tv's power button Hi, Please let me know if the unit is totally dead set without the ...

...won't power up and the timer ligt is still blinking. This is a known Mitsubishi problem with this model. See my tip at http://www.fixya.com/support/r7065906-mitsubishi_turn_flashing_power_timer ...

won't turn on. System reset does nothing. Fuse OK. Are there any lights lit on the front of the TV? Have you checked for a bad lamp? When you reset the TV the timer/power light should flash on and

...won't stop. Ive tried to unplug it and use the reset button but still no fix. Thats a very common problem with that model which is the V26 chassis. You can get the V26 Chassis DLP DM ? Power ...

...won't reset? Thats one of the famous capacitor issue most likely. Thats the V26 Chassis DLP and usually that symptom is caused by failed DM and Power Board capacitors. There is a repair kit ...

power supply board.If the readings are normal, and still the ballast won't ignite (you can hear a slight snap sound when the ballast board trying to ignite), then you have to replaced it.Click the

...won't power on, red led flashes 4 times and then yellow flashes 8 times. I have unplugged and let set and it doesn't help...what next? MITSUBISHI WD-73640 won't power on, red led ...

...won't turn on. We've unplugged it and tried to push the reset button and the green light is still blinking. Hi,If the led light flashes green continuously, the fault came from the DM power ...