Question about Mitsubishi WD Televison & Video
I've replace the lamp and capasitors, now I'm getting two codes. 4 1 and 3 3 The 33 error means the air filter cover is open. The 41 error means a short is detected.
...no luck pressed device + menu got four blinks then five so error code 45 but cant find out what that means go to the manufacture site they should tell you what the code means if not try ...
...a pause, and 1 blink of the status light. Any ideas? Thanks they dont have a 21 error they do have a 12 and a 22 error code. 12 means normal no error detecteced 22 is momentary upset after ...
Question about Mitsubishi WD Televison & Video
getting error code 12 on mitsu wd 62525 dlp tv. any help would be great. 12 means no error detected. What are the symptoms of the set? If its the blinking led thats the DM caps which have failed.
error , tv turns on i get sound but i get no picture , i have a new bulb , what else could it be , i check the ballast plug , im not sure how the connection should be , im told to check the voltage on
..."capacitor" problem. Error code 12 signals that no failures were detected , which means that it's a power source failure. You will need to check it - the board sits on top of the main
Question about Mitsubishi WD Televison & Video
...just shut down- no picture, no sound, the set just turns off. When I check the TV for an "error code," I am able to identify error code # 38. What does error code # 38 mean? This ...
Question about Mitsubishi WD Televison & Video
...and then it powers itself off and the red light under replace lamp comes back on. When I checked the error code it was 12 which means no error. What could the problem be? bad capasitors in power ...
Question about Mitsubishi WD Televison & Video
error code means. I tried to find a list of error codes, but have found nothing yet. Lamp did not turn on at P-ON sequence (No Lamp inserted) (Disconnected cable between ballast and lamp) (Lamp-Enable
...means no error. The device and menu buttons have to be pushed after unplugging and re-plugging for the error code operational check to work. If you have done that and if its still the same, then ...
1,606 questions posted
Usually answered in minutes!
661 Questions
252 Questions
240 Questions
221 Questions
188 Questions