Mitsubishi WD-52525 52" Rear Projection HDTV "dlp tv bright bottom" Questions

...tv still haves the black on the top and the bottom......maybe i need to re-in just the mirror.....can you please help me.....thanks This not the correct Model #, this model is a DLP set and does not ...

tv new a few years ago. it has done well except for the lamp replacement which is normal for these. 2 months ago we had red blotches on evryones skin tone and a local "quality electronics" came out as

dlp 52 inch tv, its 2 years old and watching a hight def channel the picture has a light haze to it.I had explain the situation to a authorized mitsubishi repair shop and the said i might be the light

...TV died. And I do mean blow out, not burn out. We didn't get any lamp replacement warning. It flat out blew the 1-yr old bulb to shards of glass inside the casing. We replaced the bulb with a brand ...

DLP based, you probably need a new bulb. If it's CRT based, you can bring them back to life with a simple adjustment. If it's a CRT (depending on model) the adjustment is either on the back, or on the

...DLP HDTV model # 50ML8105D/17 television. Last week the picture went black (still have sound) I have been told by a local tech guy (he doesn't do repair work) that it is the bulb? The TV had a bright ...

...DLP-picture seems washed out My TV seems fine when the image is dark or normal. But if there is a bright background or if the image an outside situation with bright sun or sky in background it seems ...

...DLP Samsung in that it just randomly cuts off. When you cut it back on it will run for even less time. Finally it get t obe so often you cut it off for hours. We have repalced the tube twice so that ...

...TV died. And I do mean blow out, not burn out. We didn't get any lamp replacement warning. It flat out blew the 1-yr old bulb to shards of glass inside the casing. We replaced the bulb with a brand ...

...DLP that turns off after 5-10 seconds of powering up. The bulb lights but before it gets to full brightness it goes out and both red lights (bulb and temp?) on the power button are on. I've tried ...