Mitsubishi WD-52525 52" Rear Projection HDTV "dlp led issue" Questions

...led flashing so, i order the replacement and instal it, now i have no picture at all, all i see on the scren is some snow. It sounds like an issue wuth the dmd board ,This it how it works: ...

...led is contantly blinking. The V26 DM repair kit will usually repair that issue. You can get the kit at the following link which contains the replacement capacitors and instructions. ...

...led is srtaedy blinking green you would need the V26 Chassis DLP DM / Power baord repair kit from www.tvrepairworld.com which does come with instructions. If your symptom is different they can also ...

...DLP wd-52725 wavy lines from top left to bottom right wavy lines (appear to be green and top left to bottom right) showing up primarily on HD channels doesn't seem to be on regular channels. I have ...

...led issue on that model DLP in about 80% of the cases the other 20% will have other issues but since your set lost power for over a few minyues i would assume its the capacitors. ...

...DLP TV. The TV started cutting off and the red lamp LED would come on. The first time it went out, I started by vacuuming all the vents and filter areas which didn't work) I then purchased a new lamp ...

...led is continuously blinking green. The V26 DLP DM repair kit will usually repair that issue you can get the kit at the following link which includes the replacement capacitors and step by step ...

DLP TV. I turn it on and all is well for about 2 minutes. Picture quality is excellent. The Timer/Power light is constant green, which mean the TV is on. After about 2 minutes the TV picture and audio

...led will go red. It will sometimes come back on without unplugging and sometimes you must unplug wait 2 minutes and the plug back in. I have replaced the lamp with a new one and it did not fix the ...

...DLP WD-52531 television. The other day I turned it on and thought something was wrong with my cable tv. The screen would flash to black, almost like the blink of an eye, for a half a second. It would ...