Question about Mitsubishi WD Televison & Video
...AC power cord is removed because the code will reset to "12" means no error. Use the front panel buttons not on the remote control. If you can't access the self diagnostic, press and hold the ...
Question about Mitsubishi WD Televison & Video
...remote or the front panel. When I remove and reapply AC power by unplugging the cord, the Power/Timer indicator light blinks rapid-green for a minute or so (100+ blinks) then goes out, with the same ...
Question about Mitsubishi WD Televison & Video
...AC off/on) (1~2 sec) get the error code by doing this: (and let me know) Error Code Operational Check Pressing the front panel ?INPUT? and ?MENU? buttons at the same time, and holding for 5 seconds, ...
remote control will not work check first the batteries of remote control maybe weak or empty charge. if nothing happen even the remote is good check the ac fuse on power supply section for busted test
Question about Philips Televison & Video
...ac cord is fine though, so is remote hello the glass fuse inside the tv might blew make sure the tv unpluged take the back in the power supply you should see a glass fuse if the fuse is black then ...
...remote have power and work fine. I did plug the tv power cord into a different outlet, still no power. Could the problem be with the ac adapter? could be the ac adapter.... did you experience a power ...
...AC supply completely.No movement on red led when remote power on selected. Sometme both green and red come on together but still no power up, a couple of goes removing the AC supply seems to work ...
...AC power and redo the cabling. Switch on the TV and see if it works.. Good luck.. the picture size of the tv has changed, there will be the option in your tv to reset it to the default factory ...
...on timer and standby tried to disconnect the ac supply to the tv for a while. then plug it again and power it on hope it will back to normal. you can use the remote control then turn off the
...remote so it can't be a problem with the remote. this is driving me crazy! Microprocessor IC glitch?? Try hard reset==leave unplugged from ac (power) overnight.PLug-in,try again.Hope this
1,606 questions posted
Usually answered in minutes!
661 Questions
252 Questions
240 Questions
221 Questions
188 Questions