...sensor PWB too. and it stills displaying the misfeed trouble. What can i do with this trouble? everything is checked and cleaned and it stills that way. I'll be waiting for your support. Thank you. ...
...sensor trouble Detail Toner control sensor output open Cause Connector harness trouble Connector disconnection Sensor trouble Check and remedy Check connection of the toner control sensor. Check ...
sensor. Trouble content 5 continuous detection of POD1 not-reached jam Section PCU Case 1 Cause The fusing jam is not removed completely. (Jam paper remains.) Check and remedy Check the fusing section
...mx-2700n code f2-65 Toner motor trouble. Toner density sensor trouble. Connector/harness trouble. PCU PWB trouble. Toner cartridge trouble. Developing unit trouble. Toner transport pipe section ...
Question about Sharp Office Equipment & Supplies
...trouble between the PCU PWB and the separation position sensor Check and remedy Check the harness between the PCU PWB and the separation position sensor. Case 2 Cause The belt position sensor is not ...
...32 Process control trouble (Drum Mark) U7 00 RIC communication trouble 37 Drum marking sensor gain adjustment error U9 00 Operation control communication trouble (ICU) 39 Process thermistor ...
Question about Sharp Office Equipment & Supplies
...trouble Sensor breakdown Check and remedy: Connect the connector again. Install the developing unit again. Replace the developing unit with a normal one. Thats what the Manual says, your toner is not ...
...motor. L2 = Mirror motor lock L3 = Mirror returntrouble L5 = Lens trouble,check the lens motor,sensor and driver board. L6 = Rotary casette trouble L8 = Full wave signal error L9 = Sorter
...sensor flag in your fuser. H4-01···Fusing section low temperature trouble ?The set temperature is not reached within the specified time (normally 3 min) when warming up or resetting ...
753 questions posted
Usually answered in minutes!
382 Questions
267 Questions
215 Questions
218 Questions
230 Questions
