Question about Ricoh Office Equipment & Supplies
...Drum light has come on and stays on during my printing. Is the drum going bad? This means your drum unit is coming due for replacement. If your print quality is still good I would just reset the drum ...
drum light blinking The light blinking means it's almost used up, when it comes on solid it will stop printing. If your prints still look good you can open the front door and hold the go button til ...
Question about Xerox Office Equipment & Supplies
my drum light is coming on when using my 203a printer That means that you're soon going to have to replace the drum in the printer
drum light is on This usually means that you need to replace the drum on the printer. Most likely it's under 10%, because that's when the warning light comes on. Depending on the printer, you may have
mean and how do I fix this problem? If you need to please call me at 412-452-5975. Thank You, Rebecca Atkinson Hi there ! Don't worry, it does not detect any hardware failure. Drum end near means that
Question about Ricoh Office Equipment & Supplies
...drum light flashes, then all 4 flash. I have replaced the drum unit and pressed the button until all 4 lights come on and then shut the cover, but they are still flashing. Please advise This means ...
light for Drum comes on This means drum error, you need to clean the corona wire. To see how to clean the corona wire please click the link below. http://welcome.solutions.brother.com/BSC/public/us/ca
...drum light is flushing Open front door where toner/drum goes in Hold GO button down for about 5 seconds All lights should come on then go out when GO button is released Shut door and wait for warm up ...
Question about Ricoh Office Equipment & Supplies
...mean a Drum Unit? If you put a drum cartrige called a DR-someting in the unit you must reset the counter. The step by step instructions comes with the drum unit. If you don't have it open the front ...
...mean the drum is bad. Are there other lights on and are they solid or blinking? May be a fatal service error with a secondary error that can be gotten by pressing a button while the first error is ...
298 questions posted
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions