Question about Televison & Video
...off the supplied Power supply and rechargeable batteries. The batteries ran down and I plugged the psu and display came back - for a few minutes! The sealed Power Supply unit (psu) is probably ...
...i have aquired from work , due to the fact it has no display or sound and appears to have a faulty PSU. The sets green led is flashing on the front , as though the psu is tripping. ANy faulty ...
...I put it back on, no power. Tried different outlets, but no better. Check connector between Logic & PSU 2nd pin from Left (Vs_ON) for DC volts. If Voltage is 0 then problem is with Logic or SSB. If ...
POwer Supply blown Teere was a power surge and my PSU fried.How can I replace my PSU.Thjere are no service centers in Canada for Digimate. just get the specs for that PSU. Look for the output voltage ...
...in the TV circuitry, that is shutting down the power supply. If all connections are removed and the PSU, still will not give power, it is most likely the PSU itself. If it DOES give power, you have ...
Question about Samsung Televison & Video
I have a Samsung TV, LN40C630, that won't power-on after replacing the PSU (Power Supply Unit). The PSU has an 'OK' status. Suggestions ? Replaced PSU. Contact the authorized service center for ...
...when I turn it on the screen will flash colors and then turn off. Check connector between Logic & PSU 2nd pin from Left (Vs_ON) for DC volts. If Voltage is 0 then problem is with Logic or SSB. If ...
...turning black in a circular motion spreading across the screen. Check connector between Logic & PSU 2nd pin from Left (Vs_ON) for DC volts. If Voltage is 0 then problem is with Logic or SSB. If ...
53 questions posted
Usually answered in minutes!
3 Questions
2 Questions
1 Questions
1 Questions