Sampo PME-42S6 42 in. HD-Ready Plasma Television "identify noise comming circuit board" Questions

...noise that run on your tv are caused by a bulged capacitor on the circuit board on your television which can be replaced if known how to identify the right one and change it, or get it done by a ...

...noise in the back. Sumsung Executive Customer Service is a scam . I have no warranty please help. I fixed this model of TV. Symptom was NO POWER. Totally dead. Not even a blue LED up front. Here's ...

...noise following it. It happens every couple of minutes. I tried to unhook the cable cords and unplug the tv thinking it might be the cause but it continues to do it. The tv is only a year old and I ...

noise from the back when I stand near it. Red light on the front not on. Any suggestions? There's a good chance you have failing electrolytic capacitors either in the power section or the inverter

identify the component part no. or value and able to purchase the replacement. 4. If you found a defective component, it may not be the only one that was defective. It may have been just a part of the

...noise when trying to power it on. The Blue light would remain on, and it would make the click on and click off sounds. After reading here, I ordered a new power board and replaced that today. After ...

...board. When first plugged in the green LEDs on the PSU would light and the relays would click. There would then be a short buzzing noise, the relays would click and the green LEDs would go out. The ...

noise. Took the TV apart and change the fuses and don't know if connected the pins back together properly. Still no picture to reset new lamp. TV was left open in back for 7 days don't know if