Star Micronics TSP600 Thermal Printer "paper loading incorrect" Questions

...incorrect paper source setting printer only asking to load roll paper when attempting to print from a tray. comment popping up is "incorrect paper source setting" test prints going through. ...

...paper size changes to an incorrect setting or cannot be changed, it is likely that the paper size guides in either the 250-sheet or the 530-sheet paper tray are not set correctly. Remove the media ...

Printer loads paper incorrectly when trying to print If I try to print something the printer does not load the paper evenly. Instead, it loads one side really fast resulting in the paper getting ...

...paper is being loaded sideways instead of length ways or visa verse There is a incorrect setting in the printer driver that is set up for this specific printer that 'merlin' uses, check print driver ...

...settings. Also check if the paper guides are set to the correct size in the paper tray. Sometimes, the paper sensors will not detect the correct paper if the guides are set to the incorrect

letter or A4 paper into the input tray. Press the OK button on the control panel. Cause An incorrect type of paper is loaded in the input tray My printer won't print the last line on the word document

...and weight and that the paper is being fed from the appropriate input source. Make sure the paper trays are loaded correctly. Incorrect loading of the trays can result in poor paper feed ...

...Paper'. Flashing resume light also can mean: 1. cartridge is missing or an incorrect print cartridge is installed 2. cartridge is out of ink 3. dirty cartridge contacts 4. paper jammed Check are ...

...incorrect printer driver. Reselect the printer driver appropriate for your device. - Invalid entry Invalid data or response. Correct the entry. - Jam in Cartridge area A paper jam has occurred in the ...

...paper loading. Make sure that your paper is loaded properly, and that the paper type is made for your specific printer. Check the hardware. If paper is not feeding properly into the printer, the ...