Yamaha DVR-S120 DVD Player "put board" Questions

...put just no pictures...shows a blank black screen How old is it? Open it up and inspect the circuit board carefully for cracks. TV makers use cheap, one sided circuit boards (meaning weak) that break ...

...put on it and finalize the disk before I shut down the machine or it will so no disk in machine when I restart it. It sounds like the most like culprits are the laser assembly or it could be the Mpeg ...

board, or the way I did it, being 300 miles from home and no soldering iron to hand I took the top off the switch folded some silver foil over and over and put it inside the switch replaced the switch

...board so you can put it on a bench or table. You'll need a good light and a magnifying glass. You have to examine the entire circuit board for patches of rust. Pay particular attention to the bottom ...

...displaying FINALIZE FAILED. The disc will play on the machine, but not on any other machine. Putting it into another machine gets the message that the disc is blank? The power supply board on ...

...put in.Please Help The DVD processing section is faulty. This is the main board of the DVD and it is not processing the RF from the optical head to convert the DVD signals. I think you will need to ...

...put a movie in I can only get it out if I turn the power off and start it by pushing the open button. It will not do anything else, it just says loading. This is a main board problem and main board ...

...was to take all the screws out and jiggle it then put all screws back except the one to the left of the board, next to the brown board. seems to work now. Tip found on another forum, no credit to ...

...Put in an ordinary audio CD and play to notice if the CD is detected. If yes the optical is working, if not there is no laser scanning and the possibility that the laser head can be defective. Now ...

...Put in an ordinary audio CD and play to notice if the CD is detected. If yes the optical is working, if not there is no laser scanning and the possibility that the laser head can be defective. Now ...