Yamaha CDC-765 5-Disc CD Changer "player tray drive" Questions

player isn't reading disks because the plaform on which the spindle and lens in housed stops about 5mm short when the disk tray closes. How can I fix this so that the platform raises itself that extra

player. The tray won't close when I press the "Open/Close" button. I had this problem several months ago, and I got it repaired under warranty (I think they replace the tray or the tray mechanism) and

...but if there are only gears to drive the tray mechanism then it could be broken teeth on a gear wheel, faulty drive motor or faulty motor driver electronics. Hope you can fix it. Regards, ...

tray on my new cd5001 player as it was opening. The tray now opens and closes continually while the unit is turned on. It will not play discs and the words open & close come up on the screen as it

...Player and in the front of t he drive tray there is a small motor that has a small belt on it. If that belt breaks of falls off of the pulleys, you will hear the motor spinning and then it gives up. ...

...tray there is the loading motor and a drive belt that connects it to the gears ***`y, if youre a handyman you can take it out but be careful and look how you dismantle/reassemble the tray, also look ...

...it open after you have pressed the 'load' key. Place your CD in the tray, press the 'load' key and push the tray closed manually. The player will work like this until you can replace the

...player my cd is stuck do not want to come out Open the top cover of your CD using a screw driver, (usually a star screw driver),. Then, manually turn the driving gear of the CD tray to free the ...

Tray won't open. Yamaha CDC 5 disc player. Tray won't open unless I pull or pry it. It tries to open but won't. Drive belt for draw is duff needs replacing

Player Tray keeps opening and closing by it self This is either caused by the drive belt slipping, the closed sensor being faulty or an obstruction to the tray. Basically the tray isn't makeing it