Yamaha CDC-765 5-Disc CD Changer "align 5" Questions

I HAVE A PROBLEM WITH MACHINE SKIPS ON PLAYBACK IT SKIPS ON PLAYBACK I think the laser is mis-aligned and its one for a competant technician. Hope this helps.

...of a CD and then simply stops and skips to next CD. Not a problem with the CD's. I suspect a laser alignment issue inside CD Player but don't know anything about this. any suggestions before I head ...

SL-PD888 rotates disk tray continuously after turn on The tray is usually detected by an opto interrupter device. When they or the interconnecting circuits fail this is the symptom you will have. It ...

after cleaning and checking the other things listed above, you may have a problem with the player's alignment. Of course, one of the problems you'll face checking alignments on a DVD/CD player is that

...1/4 inch. I had a CD dislodged and removed the top and then removed the CD. The 5 disc holder is aligned with the detent in the machine so it closes in the proper orientation but it does not close ...

...tray is not in time so the security switch dont let to open this try to get ifo how put on time or align the mark on main spindle against the small one hope you undrstood ...

I have a cdc 675 CD changer, When I close the draw it stays close about 10 seconds, the display reads "open" and it opens back up whether there are discs in it or not It's reporting that it (correctly

don't read disk Don't read disk. Any disk. Don't see disk. IC 102? Is the laser shooting up? If the red laser is there when u press play, then there's alignment issue with TX and track balance or the ...

...not spinning These units have optical sensors in them and the pickup assembly may have gone out of alignment. The Spindle platter can sneek down and put the CD out of range of the focus. I worked on ...

see help e 5 error when I put my cd in it keeps saying error 3 or it says reading but the songs never play help ? time for new CD player. probably the laser is worn out or oout of alignment