...Marantz PM 44-SE is tripping out even at very low volume setting - using any of the inputs with either speakers connected or disconnected. I can even hear it tripping when no inputs or speakers are ...
...Protect Mode as there are some errors in the board. The prime suspect can be the output section of the amplifer as it might be short therby comsuming higher current for the protection to activate. ...
...protect mode". This means an internal fault has been detected and will require professional service. Are all the speakers connected AND good speakers? One speaker NOT connected will make the amp ...
...marantz 4200 , any time i turn the sound above -23 the systym goes into " protect " mode . can you advise. thanks in advance. are you using a right load for the amplifier. what the rated output power ...
...mode , pls advise Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on. Overloads can be from excessive periods ...
41 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions