how to fix makita 5" grinder I have a amkita 5" angle grinder and evrytime i pull the trigger there's a sparks coming from inside. It is time to replace the trigger switch.
I was cleaning my ts400 and cant reinstall the trigger can anyon e help please? Use a pair of long nose pliers, and the trigger enough to align the wire with the slot, a drop of oil on the slot will ...
the trigger unit is broken on my metabo w11-125 angle grinder there is power to the trigger unit but not back out can you tell me where to get a new unit pls Hello Rack, you can purchase a new switch ...
...took apart an brushes looks good, what else could be wrong? depending on how old the saw is, the trigger may be shorted out. try and get into the trigger assembly to
How do I get this tool apart to clean it. The tool will not start every time I squeeze the trigger. If I turn it by hand it will run. Sometimes it does run when I squeeze the trigger. Thanks, Phil ...
...rotozip rz10 back together took it apart but can,t get it back together Hardest part is getting the trigger mechanism back in the right position while putting the screws in place. Everything has a ...
it a few times. When starting: pull the choke switch on, press the throttle lock as you squeeze the trigger (this locks the throttle into a half-on position), push in the decompression valve, and pull
Question about Saws
need to put the handel back togather, trigger, on/off switch ,springs,etc .looking for a picture showing how everything fits togather U go saris Shope
Saw runs for awhile then shuts off and continues to run. i always have to start the saw and then pull the trigger like every 5 seconds for about a minute then it works for me
how to repair angle grinder trigger switch switch does not work The switches I have seen can not be repaired but replaced.
40 questions posted
Usually answered in minutes!
103 Questions
45 Questions
43 Questions
30 Questions
