Yamaha HTR-5280 Receiver "center channel audio coming different" Questions

center channel sound output I just purchased an aperion 4C center channel. it has the two 4" speakers with the 1" tweeter in the middle of them. noticed that practically all of the sound seems to be ...

channel to work. All the surround and center speakers work. Even when I run the speaker test, no static comes out from that channel. I checked the speakker setting on the front panel and is set to B I

Center Channel is failing itermittently The center channel on my reciever has been failing intermittently when using the Dolby Digital or DTS surround modes while viewing movies.. Usually, the effect ...

...center channel, and I've been at this better than 30 years. Not to say it's impossible, but very unlikely. Did you try swapping speakers? Move the left one to the center and the center to the left. ...

...center speaker doesnt seem to work. i use it for listening to music, the sound should come out right? Sound from a speaker, nah, that's an optional feature (kidding). If you dig into the manual ...

...center channel speaker cuts in and out albeit it works most of the time. I use the reciever mainly in Normal Surround mode. Any ideas what would be causing this problem Hi, Happened across this forum ...

center channel amp which is part of the receiver. This should be a single amp IC attached to the heatsink. There should be a "test" moe that will send white noise to each speaker in sequence. Try that

...center channel a bit (or a lot of bit). Hit the "Standard" button on your remote, then "Test Tone" until "C" or "Center" comes up on the LCD. Then hit the "Level +" button a few times, making the ...

Center channel problem A few days ago the sound coming from my center channel began to sound tinny and the volume level dropped. Any ideas what the problem may be? Thanks, Steve Sound circuit card has

...different channels, i even went as far as reformatting my ps3 and resetting the default sound settings through there. I am at a complete loss, please help! thanks Try using the customer service help ...