...power connections you used to connect your amplifiers and receiver. The equalizer's yellow wire should be connected to a constant power source, one that is not switched off with the ignition, and the ...
from another component (such as an amplifier) into the equalizer. Any source that is loud enough to power a speaker is a candidate for that input. The other type of input is the line-level input. This
...power up the amplifiers simply by connecting the BLUE remote turn on wire in the harness, but can get tricky in some vehicles. Post the year make, and model of your car, and I can shoot you some ...
wiring a pyramid 903G Hello i have a pyramid 903G eq and i dont know the wires. red - power Black - Ground Blue/Black - rear Left Speaker Positive Blue - Rear Left Speaker Neg White/ Black - Front ...
...power to the capacitor and the amplifiers it has worked for 4 years with no problem until now I was wondering if the Lanzar EQ has gone bad because I have a manual switch to my eq and when I usually ...
Question about Car Audio & Video
...1 green, 1 red, 1 gray and 2 black wires coming from the back of the unit. I know that the red is power, the green is right sspeaker, and that one of the black wires is labeled as ground. I need to ...
The Tone Match unit is not receiving power The base unit is showing power and the cables are connected but the Tone Match has no power If the Tone Match has no power Eiather the unit is not wired ...
...DOWNLOADLOOK PAGE 4 INTO THE PDF
Question about Kicker Car Audio & Video
I'm looking for an amp for four 6x9" kickers CS. Can you help me? Thanks What is the power rating of each speaker? The impedance figure and how you intend to connect them are needed to correctly ...
17 questions posted
Usually answered in minutes!
18 Questions
13 Questions
12 Questions
7 Questions