Toshiba e-Studio162D Copier "error code 00 copy printer" Questions

...code CC Original not detected E1 00 Lost communication with the Sorter 10 Lost communication with the Sorter 11 ASIC error 12 Image Processing Unit error 13 ROM error 14 NVRAM error 15 Page memory ...

...error signal E0-00 This is the error code for the fuser heater lamp failure you will require a replacment lamp of fuser available from somwere like katun of reprotech all have web sites Regards ...

...14 I have tried the code, but is not responding. That error code is a low heat roller error. It could be the thermistor is bad on the fuser roller unit or the whole fuser unit may need to be

error code h200. i had saw thas meaning ,H2-00, Fusing unit temperature error, how can i taht code reset? or have u idee how can i repair? or must i everyone unit change? (sorry for my englisch:)) pls

...Code error H2-00 appers Hi Ambroise,The error H2-00 means there's a problem with your thermostarts/fusing unit.You need to check them for they may be blown.Replace the fuser if damaged.To reset ...

...Error code H3-00 I have a Sharp copier that developed an Error code when it is turned on. The Error code is H3-00. Any help would be appreciated. H3-00 means there was a problem in the fuser unit of ...

...error code H4-00 appears and coping cannot be done what do i do The heating element or the thermal fuse in the fuser unit has failed. Try pressing clear,interupt, 0, interupt, 1,4, the blue copy ...

error code H2-00 on e studio 162d? what is error code H2-00? u have a dirty thirmistor in fusr unit.first clean it.then do this procedure.press clear key,auto photo key,clear,auto photo key in a ...

...error code indicates that the Fuser is not at the correct temperature, which can lead to smeary smudgy copies or scorched paper and a fire hazard, depending upon whether the fuser is too cold or too ...

gestetner 6123cp how to solve E-00 error code i have gestetner copy printer model 6123 cenhelp me removed earror code e-00 please help me