Behringer Dsp1124p Feedback Destroyer Pro with Parametric Eq "amp mixer" Questions

...mixer or power amp oreffects in a rack system? Behringer mixer, alesis sounf effects, fender power amp Effects plug into mixer, mixer plugs into power amp.  Others may want the mixer and the ...

...mixer amp to a gli pro xa5500 3500watt amp and use it with various speakers. You have two aux sends on that mixer so quite easy to use one of those to feed the external power amp. You could have one ...

...mixer to the amp the amp showing it clipping and no sound to the main speakers If you are getting signal from you mixer at leaves tha are clipping your amp, then the mixer is working and at least the ...

...the same receptacle to avoid ground bounce. Plug into the amp inputs this allow the power amp portion of the box mixer to use the non powered mixer as a pre amp and by passes. The box mixers. Pre ...

mixer , Mike the Amp or directley thrue the mixer, we had problems with a clear sound? The easiest way is to take the line out from the bass amp and connect it to the line in socket of the mixer ( not

...amp-mixer connected to the main mixer. the house speaker is connected to the power amp and then to the main mixer. so the problem is, the house speaker has poor sound quality(almost like it's ...

amp or mixer You hook them up to the last item in the chain. If you are mixing instruments into the amp, then the speakers go to the amp. If you are mixing amplified sound (unlikely), through a mixer,

...mixer and amp I have a PV14 non powered mixer, a pyle pro 4100 amp and two non powered floor monitors. How do I connect the monitors to the mixer and amp? No knowledge of this stuff at all so please ...

...between the mixer and amp...if not then start reconnecting inputs until the hum is heard again. It's a process of elimination but not that difficult to find the source of your

...amp to a mixer. Mixer uses balanced outputs, this unit does not... Also ground loops can be a problem. Make sure this and the mixer are BOTH powered from the same receptacle. The next problem is that ...