Question about Intermatic Hardware & Accessories
clock is set and the on time is 7:00 pm, then it should be off before that. (past 7:00am). if all is correct, it should do it's job until the power fails. At which time you need to set the clock again
...time to be set, and then OFF time to be set For example you set Program1 ON 5:00PM for ALL days. And then you set Program1 OFF 11PM for ALL days. 3) Programming steps: Press PROG button until Timer 1 ...
...set it to work on a 12-hour am/pm cycle? The model number is TE22 Westek TE22 two-pack offers choice between 12 hour am-pm display or 24-hour 'military time' display. Open following link for ...
Question about Paragon Hardware & Accessories
...set it? There should be 2 trippers for each day, the trippers slide on the outside of the dial and would point to the time of day you want your lights on and off. The silver trippers may be gone on ...
...set, press CLOCK button to exit programming and save programs. Or press PROGRAM button and move to event2 ON and event2 OFF. Exit programming any time by pressing clock button. ...
...set ON time for EVENT1 >Press PROG so display shows EVENT1-off (ther is a tiny off that shows on display) >repeat steps above to set OFF time for EVENT1 >Press PROG until EVENT1-on shows in ...
...set on/off time? Aube T1032 is 500W 7-day timer with full range programming Aube T1034 is 500W 7-day Sunrise/sunset timer Aube T1070 is 500W 7-day timer that turns lights ON at sunset and OFF at ...
...set OFF time for Program1. 5) Press the PROG button until the display shows Program1 OFF just like photo below Notice that the number 1 and the word OFF appear on display 6) Ready to set Program1 OFF ...
...time. i have set the clock several times. i will set it at 5pm and come and look at 5:30 and it will say it's 5:15. Help!!!! Describe the timer. ...
Question about Intermatic Hardware & Accessories
...set the current time in hours and minutes. Make sure that AM and PM settings are correct. Note: The day of the week is shown at the bottom of the display. If you have not programmed the calendar ...
8 questions posted
Usually answered in minutes!
16 Questions
6 Questions
4 Questions
3 Questions
1 Questions